Chamunda Engineering Works

Features:

• The stable robust welded steel Frame made of ultrasonically and Tensile tested IS 2062 plate as per guidelines of IMTMA standards.
• Fast approach & fast return speed to save cycle time, slow pressing speed for better stroke control & bending accuracy, ensures high productivity
• Repeatability for ram position +0.05mm
• Compact cylinders & low pressure system due to rear cylinders. Also it gives better rigidity & load carrying capacity against fatigue failure
• Positive synchronization of sliders with welded torque tube gives better bending accuracy on both ends
• Moving work station with manual, single cycle & automatic mode for easy operation with emergency stop button
• NC upgradation possible on site
• All electrical & hydraulic component from reputed make
• Hydraulic cylinders made from seamless honed tube, hardened & grounded chrome plated piston rod fitted with twin type zero leak PU seals
• Suitable for upgradation with special optional features

Product Description

We have been manufacturing a wide range of Hydraulic Press Brake Machine. These machines are easy to install and requires low maintenance. We develop these machines with the aid of latest technology so that the end product conforms to set industry norms.

Features:

Inch-single-continuous cycles for greater operator convenience

Full powered stroke make machine suitable for general sheet metal press work

Three speeds reduce idle travel time, improves productivity

Instant ram stoppage prevents accidents and job rejections

Noiseless operation and least impact loads on tools and foundations

Less power consumption

Least wear and maintenance reduces operating costs and down time.

Product Specification Product DescriptionWe are offering Hydraulic Press Brake Machine. Press Brake hydraulic machines that we offer are widely known for their long servicing life, sturdy construction and cost-efficiency. These machines are durable and are manufactured using latest techniques to ensure excellent performance. We can customize these machines as per clients' specific requirements.

We are engaged in manufacturing superior quality of Hydraulic Rear Cylinder Type Press Brake Machine in various shapes & sizes. Hydraulic Press Brake Machine is fabricated from high grade components that assure high strength and durability to the structure. Moreover we provide Hydraulic Press Brake Machine at the most reasonable price in the industry. Refer to the attached file for technical specifications.

Frame Construction: Usually a monoblock welded steel frame (often using IS 2062 grade steel) for maximum rigidity and minimal deflection under load. Control System: Manual/NC: Uses basic digital readouts for stroke and backgauge positioning. CNC: Employs advanced controllers (e.g., Delem, Cybelec) to automate multiple axes (Y1, Y2, X, R, Z1, Z2) and complex bending sequences. Backgauge: Motorized or servo-driven systems that position the metal sheet with high precision (repeatability up to ± 0.1 mm). Power Requirements: Typically runs on 3-phase power (220V/440V) with motor sizes ranging from 3 HP to 50+ HP depending on tonnage. Energy Mission Energy Mission +7 Standard & Optional Accessories Tooling: Standard sets usually include a multi-V die (bottom) and a gooseneck or standard punch (top) made of hardened alloy steel like EN-8 or EN-31. Safety Features: Includes emergency stops, foot pedal controls, and often optional laser guards or light curtains to protect operators. Crowning System: An auto-compensation mechanism (manual or hydraulic) that prevents the "bowing" effect in the center of long bends, ensuring a consistent angle across the entire length.

Frame Construction: Usually a monoblock welded steel frame (often using IS 2062 grade steel) for maximum rigidity and minimal deflection under load. Control System: Manual/NC: Uses basic digital readouts for stroke and backgauge positioning. CNC: Employs advanced controllers (e.g., Delem, Cybelec) to automate multiple axes (Y1, Y2, X, R, Z1, Z2) and complex bending sequences. Backgauge: Motorized or servo-driven systems that position the metal sheet with high precision (repeatability up to ± 0.1 mm). Power Requirements: Typically runs on 3-phase power (220V/440V) with motor sizes ranging from 3 HP to 50+ HP depending on tonnage. Energy Mission Energy Mission +7 Standard & Optional Accessories Tooling: Standard sets usually include a multi-V die (bottom) and a gooseneck or standard punch (top) made of hardened alloy steel like EN-8 or EN-31. Safety Features: Includes emergency stops, foot pedal controls, and often optional laser guards or light curtains to protect operators. Crowning System: An auto-compensation mechanism (manual or hydraulic) that prevents the "bowing" effect in the center of long bends, ensuring a consistent angle across the entire length.

Tonnage: Typically ranges from 30 MT to 500+ MT (Metric Tons), determining the thickness and length of material that can be bent. Bending Length: Common sizes include 1500mm, 2500mm, 3200mm, and 4000mm. CNC Control Axes: Standard models often feature 3+1 (Y1, Y2, X + crowning) or 4+1 (Y1, Y2, X, R + crowning) axes, with high-end models having 6 or 8+ axes. Backgauge Range & Speed: X-axis range is typically 500-1000mm, with high-speed servo motors for rapid positioning. Daylight/Open Height: The maximum distance between the table and ram, often 350-500mm. Throat Depth: Typically 300-400mm, allowing for deeper, non-linear bends. Approach/Working/Return Speed: E.g., Approach: 100-180 mm/s, Working: 10 mm/s, Return: 100-120 mm/s. IndiaMART IndiaMART +6 Common Features Control Unit: Delem (DA53T, DA58T, DA66T), Cybelec (CybTouch 8/12 PS), or ESA. Hydraulics & Motors: Bosch Rexroth hydraulic valves and Siemens motors are standard. Safety System: Laser safety guards (e.g., Tailift Group's laser safety device) or light curtains. Crowning: Automatic hydraulic or mechanical crowning for compensation.

Tonnage (Bending Force): Represents the maximum force the machine can exert. Standard industrial models typically range from 40 tons to 1,000+ tons. Higher tonnage is required for thicker or harder materials. Bending Length: The maximum length of the material the machine can bend at once, usually ranging from 1.2 to 6 metres (4 to 20 feet). Stroke Length: The vertical distance the ram (upper beam) travels. Common ranges are between 100 mm and 380 mm. Open Height (Daylight): The maximum distance between the bed and the ram when fully retracted, typically 250 mm to 600 mm, which determines the height of dies that can be used. Throat Depth: The distance from the center of the ram to the machine's back frame. A deeper throat (e.g., 200 mm to 500 mm) allows for bending larger or more complex "box" shapes. +6 Operational Speeds Modern machines utilize a three-stage speed system to optimize productivity: Approach Speed: High-speed descent towards the material (e.g., 50–180 mm/s). Working/Bending Speed: Controlled slow speed during the actual bend (e.g., 6–22 mm/s) to ensure accuracy. Return Speed: Fast ascent after the bend is completed (e.g., 40–200 mm/s)

Chamunda Engineering Works offers hydraulic press brake. It is mainly useful for bending metal sheets and plates. These tools are made using top grade materials.

We provide technically superior and perfectly engineered instruments. They consume less electricity and need minimum maintenance. These tools include features such as better precision, higher speed and least wear and tear. Our tough and long lasting hydraulic brake press are simple to operate and noise and vibration free. We supply many models of this, as per our client's requirements and widely used in several industries.

Chamunda Engineering Works is a popular machine manufacturer and supplier. We design variety of Sheet Metal machineries suitable for complete range of engineering, We pick the competitive requirements of customers and consider the same to create tools with user friendly features. Press Brakes play a strong role in bending metal sheets. We supply that suits for cost effective, efficient and power saving machining operations. Our device is precise in bending operation, comparatively high speed than conventional press. All the tool ingredients are made of durable and rigid material that keeps up the equipment support for long term production.

These tools are applicable in majority for sheet bending and folding activities which is done with the additional die. Engineering industries which has special machining requirements on metal sheets can find reliable metal work with the help of this tool. In addition, the hydraulic principle supports for specialized sheet bending applications even when the production requirements remain continuous.

Our press tool is not just applicable for bending, apart from that it remains an accommodative machining tool for other machining activities including shearing, metal sheet cutting, angle cutting, etc.

A press brake is a powerful machine tool used in metalworking to bend and shape metal sheets with precision. It operates by clamping the workpiece between a punch and die, applying force to achieve the desired bend angle or shape.

They are widely used in industries like automotive, aerospace, and construction due to their ability to meet exact specifications. As the demand for precision, efficiency, and productivity in manufacturing continues to grow, press brake technology has undergone significant advancements.

From the early days of manual operation to Numerical Control (NC) systems and now Computer Numerical Control (CNC) systems, the functionality and performance of press brakes have greatly improved.

In today’s market, NC press brake vs CNC press brake play vital roles. An NC press brake or CNC press brake is a type of press brake machine that uses a CNC system (a numerical control system) to control the bending process.

The main difference between the NC press brake and the CNC press brake is that the latter has a more advanced controller. This allows for complex programming to be carried out, leading to higher accuracy and automation levels. The CNC press brake can handle complex workpieces and mass production.